Service manual

ManualsBrandsUtax ManualsAll in One Printercd 1116

100

Maintenance

Description

item No.

2DA/2DB

1-4-24

U093 Setting the exposure density gradient

Description

Changes the exposure density gradient in manual density mode, depending on respective image modes (text,

text and photo, photo, text in fax mode, photo in fax mode).

Purpose

To set how the image density is altered by a change of one step in the manual density adjustment. Also used to

make copy image darker or lighter.

Start

1. Press the start key. The screen for selecting an item is displayed.

2. Select the image mode to be adjusted using the up/down cursor keys and press the start key. The screen

for the selected item is displayed.

Display Description

MIXED Density in text and photo mode

TEXT Density in text mode

PHOTO Density in photo mode

FAX TEXT Density in the text in fax mode

FAX PHOTO Density in the photo in fax mode

Setting: Density in text and photo mode

1. Select the item to be adjusted using the up/down cursor keys. The selected item is displayed in reverse.

2. Adjust the setting using the left/right cursor keys.

Display Description Setting range Initial setting

MIXED DARKER Change in density when manual 0 to 3 0

density is set dark

MIXED LIGHTER Change in density when manual 0 to 3 0

density is set light

Increasing the setting makes the change in density larger, and decreasing it makes the change smaller.

Image density

Density adjustment

Dark

Light

Center

Dark

Setting: 0

Setting: 3

Set to DARKER

Set to LIGHTER

Figure 1-4-4 Exposure density gradient

3. Press the start key. The value is set.

4. To return to the screen for selecting an item, press the stop/clear key.

Setting: Density in text mode