Specifications

Internet Faxing (i-FAX)
OPERATION GUIDE 8-5
8
i-FAX Settings
To send and receive Internet faxes, you must first specify the SMTP server
and POP3 server settings.
Specify these settings using COMMAND CENTER on a computer that is
connected to this machine via a network.
Refer to the machine’s Operation Guide for information on the network
settings.
Accessing COMMAND CENTER
1
Open the web browser.
2
In the Address or Location bar, enter the machine’s IP address as the URL,
e.g. http://192.168.48.21/. The web page displays basic information about
the machine and COMMAND CENTER as well as the current status of the
machine.
3
Select a category from the navigation bar on the left to view and set values
for that particular category.
4
If administrator privileges have been enabled on COMMAND CENTER,
remember to enter the correct user name and password when trying to
access the relevant screens.