Specifications

FAX Operation (Basic)
OPERATION GUIDE 3-19
3
20
Press [OK].
21
If necessary, change the settings for transmission start speed and ECM
communication. Change the settings after pressing each key, and press
[OK].
22
Check if each item has been entered correctly, and press [OK].
23
Check if the destination has been set correctly, and press [Register]. The
destination is added to the Address Book.
Contact Registration (i-FAX)
Up to 2,000 contacts can be registered. Contact name, i-FAX address,
transmission mode and the conditions for the destination machine can be
registered for each contact.
1
Press the System Menu key.
2
Press [Edit Destination], [Register/Edit] of Address Book, [Add], [Contact],
and then [Next].
3
Press [Change] of
Address Number.
4
Using [+]/[-] or the numeric keys, enter the custom address number (0001
to 2,500).
Key Description
Transmission Start
Speed
To change the transmission start speed, press
this key. Select the speed from 33,600 bps,
14,400 bps, and 9,600 bps.
ECM ECM (error correction mode) is a function to
automatically resend an image that has not
been correctly sent or received due to the
effects of noise on the telephone line during
transmission. To change the ECM
communication setting, press this key.
Status
Contact Name
Back Register
Address Number:
10/10/2007 10:00
Addres s
Name:
Change
Change
Cancel
Auto
Addres s: