USER MANUAL COLOUR PRINTER P-C3060DN Print A4
P-C3060DN Operation Guide
Contents 1 Machine Parts Components at the Front of the Printer ................................... 1-2 Components at the Left of the Printer ...................................... 1-2 Internal Components .................................................................. 1-3 Components at the Rear of the Printer ..................................... 1-3 Operation Panel ..........................................................................
iv
Legal and Safety Information CAUTION NO LIABILITY IS ASSUMED FOR ANY DAMAGE CAUSED BY IMPROPER INSTALLATION. Notice on Software SOFTWARE USED WITH THIS PRINTER MUST SUPPORT THE PRINTER'S EMULATION MODE. The printer is factory-set to emulate the PCL. Notice The information in this guide is subject to change without notification. Additional pages may be inserted in future editions. The user is asked to excuse any technical inaccuracies or typographical errors in the present edition.
• UFST™ MicroType® fonts by Monotype Imaging Inc. are installed in this machine. • AirPrint and the AirPrint logo are trademarks of Apple Inc. • iOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license by Apple Inc. • ThinPrint is a trademark of Cortado AG in Germany and other countries. All other brands and product names are registered trademarks or trademarks of their respective companies.
6 You agree that you will not modify, alter, disassemble, decrypt, reverse engineer or decompile the Software. 7 Monotype Imaging warrants that for ninety (90) days after delivery, the Software will perform in accordance with Monotype Imagingpublished specifications, and the diskette will be free from defects in material and workmanship. Monotype Imaging does not warrant that the Software is free from all bugs, errors and omissions.
3 All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)" 4 The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact openssl-core@openssl.org.
2 Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3 All advertising materials mentioning features or use of this software must display the following acknowledgement: "This product includes cryptographic software written by Eric Young (eay@cryptsoft.
Compliance and Conformity This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Safety Information Laser Safety This printer is certified as a Class 1 laser product under the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard according to Radiation Control for Health and Safety Act of 1968. This means that the printer does not produce hazardous laser radiation. Since radiation emitted inside the printer is completely confined within protective housings and external covers, the laser beam cannot escape from the printer during any phase of user operation.
Cautionary Labels The printer bears any of the following labels. High temperature inside. Do not touch parts in this area, because there is a danger of getting burned.
CDRH Regulations The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration implemented regulations for laser products on August 2, 1976. These regulations apply to laser products manufactured after August 1, 1976. Compliance is mandatory for products marketed in the United States. A label indicating compliance with the CDRH regulations must be attached to laser products marketed in the United States.
Canadian Department of Communications Compliance Statement This Class B digital apparatus complies with Canadian ICES-003. Avis de conformité aux normes du ministère des Communications du Canada Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. EN ISO 7779 Maschinenlärminformations-Verordnung 3. GPSGV, 06.01.2004: Der höchste Schalldruckpegel beträgt 70 dB (A) oder weniger gemäß EN ISO 7779.
Energy Saving Control Function The device comes equipped with a Low Power Mode where energy consumption is reduced after a certain amount of time elapses since the device was last used, as well as a Sleep where printer functions remain in a waiting state but power consumption is still reduced to a minimum when there is no activity with the device within a set amount of time. Low Power Mode The device automatically enters Low Power Mode when 1 minute has passed since the device was last used.
consumption is possible. It is recommended that the machine be used with the activation time for energy-saving mode set to the default setting. Energy Star (ENERGY STAR®) Program We have determined as a participating company in the International Energy Star Program that this product is compliant with the standards laid out in the International Energy Star Program.
Installation Precautions Environment CAUTION Avoid placing the printer on or in locations which are unstable or not level. Such locations may cause the printer to fall. This type of situation presents a danger of personal injury or damage to the printer. Avoid locations with humidity or dust and dirt. If dust or dirt becomes attached to the power plug, clean the plug to avoid the danger of fire or electrical shock.
Power Supply/Grounding the Printer WARNING Do not use a power supply with a voltage other than that specified. Avoid multiple connections in the same outlet. These types of situations present a danger of fire or electrical shock. Plug the power cord securely into the outlet. If metallic objects come in contact with the prongs on the plug, it may cause a fire or electric shock.
danger of fire or electrical shock. (Always grasp the power plug when removing the power cord from the outlet.) • Always remove the power plug from the outlet when moving the printer. If the power cord is damaged, there is a danger of fire or electrical shock. • If the printer will not be used for a short period of time (overnight, etc.), turn the power switch OFF (). If it will not be used for an extended period of time (vacations, etc.
About the Operation Guide This Operation Guide has the following chapters: Chapter 1 - Machine Parts This chapter explains the names of parts. Chapter 2 - Printing Operation This chapter explains how to print from your workstation. Chapter 3 - Maintenance This chapter explains how to replace the toner container and how to care for your printer. Chapter 4 - Troubleshooting This chapter explains how to handle printer problems that may occur, such as paper jams.
1 Machine Parts This chapter provides explanations and illustrations for you to determine the parts and their functions. Try to be familiar with the names and functions of these parts for correct use and optimal performance.
Components at the Front of the Printer 1 2 3 4 5 7 6 1 Operation Panel 2 Front Cover 3 Paper Stopper 4 Top Cover (Top Tray) 5 MP (Multi-Purpose) Tray 6 Paper Cassette 7 Power Switch Components at the Left of the Printer 11 12 13 14 8 10 9 8 Left Cover 9 Waste Toner Box 10 Main Charger Units on the Drum Units 11 Magenta Toner Container (M) 12 Cyan Toner Container (C) 13 Yellow Toner Container (Y) 14 Black Toner Container (K) 1-2 Machine Parts
Internal Components 15 16 18 17 15 Paper Transfer Unit 16 Paper Ramp 17 Duplex Unit 18 Envelope Switch Components at the Rear of the Printer 19 25 20 21 22 24 23 19 USB Memory Slot 20 Power Cord Connector 21 Option Interface Slot 22 Network Indicators 23 Network Interface Connector 24 USB Interface Connector 25 Rear Cover Machine Parts 1-3
Operation Panel 26 27 28 29 30 31 33 34 32 26 Message Display 27 Ready Indicator 28 Data Indicator 29 Attention Indicator 30 Arrow Keys 31 [MENU] Key 32 [OK] Key 33 [GO] Key 34 [Cancel] Key 1-4 Machine Parts
2 Printing Operation This chapter contains explanations on the following topics: Changing Network Interface Parameters Printing a Network Interface Status Page Embedded Web Server RX Installing the Printer Driver Printing from Application Software Printing by AirPrint Status Monitor Energy Saver Function Printing Operation 2-2 2-4 2-5 2-14 2-21 2-22 2-23 2-27 2-1
Changing Network Interface Parameters This printer supports TCP/IP, TCP/IP (IPv6), NetWare, AppleTalk, IPP, SSL Server and the IPSec protocols and Security Level. The table below shows the items required for each of the settings. Configure the printer's network parameters as appropriate for your PC and your network environment. For details of the procedure, refer to the Using the Operation Panel section of the Advanced Operation Guide.
Menu Submenu Setting SSL Server On/Off DES On/Off 3DES On/Off AES On/Off IPP over SSL On/Off HTTPS On/Off IPSec On/Off LAN Interface Auto/10BASE-Half/ 10BASE-Full/ 100BASE-Half/ 100BASE-Full/ 1000BASE-T Security Level High/Low Note After all network related settings have been done, turn the machine OFF and ON again.
Printing a Network Interface Status Page You can print out a status page for the network interface. The network status page shows the network addresses, and other information under various network protocols about the network interface. Adjust/Maintenance Adjust/Maintenance is used to adjust the print quality and to carry out printer maintenance.
Embedded Web Server RX If the machine is connected to the network, you can configure various settings using Embedded Web Server RX. This section explains how to access Embedded Web Server RX, and how to change security settings and the host name. For details on Embedded Web Server RX, refer to the Embedded Web Server RX User Guide. Note To fully access the features of the Embedded Web Server RX pages, enter the User Name and Password and click Login.
Accessing Embedded Web Server RX 1 2 Launch your Web browser. In the address or location bar, enter the machine's IP address or the host name. Examples: https://192.168.48.21/ (for IP address) https://P001 (if the host name is "P001") The web page displays basic information about the machine and Embedded Web Server RX as well as their current status. Note If the screen There is a problem with this website's security certificate. is displayed, configure the certificate.
Changing Security Settings This section explains how to change the security settings. 1 Access Embedded Web Server RX by referring to Accessing Embedded Web Server RX on page 2-6. 2 From the Security Settings menu, select the setting you want to configure. The configurable settings are Device Security, Network Security, and Certificates. Note The configurable settings within Device Security and Network Security can also be configured from the machine's System Menu.
Changing Device Information Change the device information of the machine. 1 Access Embedded Web Server RX by referring to Accessing Embedded Web Server RX on page 2-6. 2 From the Device Settings menu, select System. 3 Enter the device information, and then click Submit. IMPORTANT After changing the setting, restart the network or turn the machine OFF and then ON. To restart the network interface card, click Reset in the Management Settings menu, and then click Restart Network in Restart.
E-mail settings By configuring the SMTP settings, you can send E-mail notifications on completed jobs. To use this function, this machine must be connected to a mail server using the SMTP protocol. In addition, check the following. • The network environment used to connect this machine to the mail server A full-time connection via a LAN is recommended. • SMTP settings Use Embedded Web Server RX to register the IP address or host name of the SMTP server.
3 Setting Description SMTP Set to send e-mail from the machine. SMTP Protocol Set SMTP protocol. Set the SMTP (E-mail TX) setting to On on the Protocol Settings page. SMTP Server Name Enter the host name or IP address of the SMTP server. SMTP Port Number Specify the port number to be used for SMTP. Use the SMTP default port 25. SMTP Server Timeout Set the amount of time to wait before time-out in seconds. Authentication Protocol Set whether SMTP authentication is used.
Setting E-mail Send Settings Description E-mail Size Limit Enter the maximum size of E-mail that can be sent in kilobytes. When E-mail size is greater than this value, an error message appears and E-mail sending is cancelled. Use this setting if you have set E-mail Size Limit for SMTP server. If not, enter a value of 0 (zero) to enable E-mail sending regardless of the size limit.
Registering a Custom Box You can register a custom box from Embedded Web Server RX. 1 Access Embedded Web Server RX by referring to Accessing Embedded Web Server RX on page 2-6. 2 From the Document Box menu, click Custom Box. 3 4 Click Add. Enter the box details. Enter the information for the custom box you want to register. The fields to populate are the same as when registering on the machine. For details, refer to the Using the Operation Panel section of the Advanced Operation Guide.
Printing a document stored in a Custom Box A document stored in a Custom Box can be printed from Embedded Web Server RX. 1 Access Embedded Web Server RX by referring to Accessing Embedded Web Server RX on page 2-6. 2 From the Document Box menu, click Custom Box. 3 Click the number or name of the Custom Box in which the document is stored. 4 Select the document you wish to print. Select the checkbox of the document to be printed. 5 6 Printing Operation Click Print.
Installing the Printer Driver Ensure the printer is plugged in and connected to the PC before installing the printer driver from the DVD-ROM. Note Installation on Windows must be done by a user logged on with administrator privileges. When connected by USB cable, Plug and Play is disabled on this device when in Sleep mode. To continue the installation, press the GO key to wake the device from Low Power Mode or Sleep before continuing. KX XPS DRIVER cannot be installed on Windows XP.
4 Select the device to be installed. You can also select Use host name for port name and set to use the host name of the standard TCP/IP port. (A USB connection cannot be used.) Note The machine cannot be detected unless it is on. If the computer fails to detect the machine, verify that it is connected to the computer via a network or USB cable and that it is turned on and click (Reload). 5 Select the package to be installed.
Custom Install The following procedure is an example for installing the software in Windows 7 using Custom Install. 1 Insert the DVD-ROM. Note Installation on Windows must be done by a user logged on with administrator privileges. If the Welcome to the Found New Hardware Wizard dialog box displays, select Cancel. If the autorun screen is displayed, click Run setup.exe. If the user account management window appears, click Yes (Allow). 2 Click View License Agreement and read the License Agreement.
5 Select the device to be installed and driver to be installed, and then click the arrow button to move it to the Products to Install list. 6 Select the utility to be installed, and then click the arrow button to move it to the Products to Install list. 7 Click Install. Note To install Status Monitor, it is necessary to install Microsoft .NET Framework 4.0 beforehand. 8 Finish the installation. When Your software is ready to use appears, you can use the software.
Uninstalling the Software Perform the following procedure to delete the Software from your computer. Note Uninstallation on Windows must be done by a user logged on with administrator privileges. 1 Click Start button on the Windows and then select All Programs, (name of offer company), and Uninstall Product Library to display the Uninstall Wizard. 2 Place a check in the check box of the software to be deleted. Click Uninstall.
1 Insert the DVD-ROM. 2 3 Double-click the GEN_LIB icon. 4 Double-click (Brand Name) OS X 10.5+. 5 The printer driver installation program starts up. 6 Install the printer driver as directed by the instructions in the installation software. Double-click OS X 10.5 or higher . This completes the printer driver installation. If a USB connection is used, the machine is automatically recognized and connected. If an IP connection is used, the settings below are required.
8 Click the plus symbol (+) to add the installed printer driver. 9 Click the IP icon for an IP connection and then enter the IP address and printer name. The number entered in Address will automatically appear in Name. Change if needed. Note When using a Bonjour connection, select Default and click the item that appears in Printer Name. The driver with the same name as the machine automatically appears in Driver. 10 Select the options available for the machine and click Continue.
Printing from Application Software The steps required to print a document created with an application are explained below. You can select the printing Paper Size and Output Destination. 1 2 Load the paper required into the paper cassette. 3 Click the drop down list of printer names. All the printers installed in Windows are listed. Click the name of the machine. 4 Use Number of copies to enter the number of prints required. Up to 999 copies can be entered.
Printing by AirPrint AirPrint is a printing function that is included standard in iOS 4.2 and later products, and Mac OS X 10.7 and later products. This function enables you to connect and print to any AirPrint compatible device without installing a printer driver. To allow the machine to be found when printing by AirPrint, you can set machine location information in Embedded Web Server RX. For details, refer to the Embedded Web Server RX User Guide.
Status Monitor The Status Monitor monitors the printer status and provides an ongoing reporting function. Note When you activate Status Monitor, check the status below. • Printing System Driver is Installed. • Either Enhanced WSD or EnhancedWSD(SSL) are set to On in Security section of the Advanced Operation Guide. Accessing the Status Monitor The Status Monitor also starts up when printing is started. Exiting the Status Monitor Use either of the methods listed below to exit the Status Monitor.
Printing Progress Tab The status of the print jobs is displayed. Status icon Job list Select a job on the job list and it can be canceled using the menu displayed with a right-click. Paper Tray Status Tab Information is displayed about the paper in the printer and about the amount of paper remaining. Toner Status Tab The amount of toner remaining is displayed.
Alert Tab If an error occurs, a notice is displayed using a 3D image and a message. Status Monitor Context Menu The following menu is displayed when the settings icon is clicked. Settings icon • Configure... If the printer is connected to a TCP/IP network and has its own IP address, use a web browser to access the Embedded Web Server RX to modify or confirm the network settings. For more information, refer to the Embedded Web Server RX User Guide. This menu is not displayed when using USB connection.
Status Monitor Notification Settings The Status Monitor settings and event list details are displayed. Select whether notification is performed when an error in the event list occurs. 1 Select Enable event notification. If this setting is set to Off, then the Status Monitor will not start up even when printing is executed. 2 Select an event to use with the text to speech function in Available events. 3 Click Sound file / Text to Speech column. Click the browse (...
Energy Saver Function Low Power Mode When the set time (factory setting is 1 minute) elapses after the printer is last used, the printer automatically enters low power mode. The message display backlight and lights turn off and power consumption is reduced. This status is referred to as Low Power Mode. The amount of time of no activity that must pass before Low Power Mode is activated may be lengthened.
Note that ambient environmental conditions, such as ventilation, may cause the machine to respond more slowly. For more information about configuring settings, refer to Sleep Timer (Sleep timer timeout setting) section of the Advanced Operation Guide. Energy Saver Mode This mode reduces power consumption even more than quick recovery mode, and allows Sleep mode to be set separately for each function. To use the printer, press [GO]. The printer will be ready to operate within 24 seconds.
3 Maintenance This chapter contains explanations on the following topics: General Information Toner Container Replacement Replacing the Waste Toner Box Cleaning the Printer Maintenance 3-2 3-2 3-6 3-8 3-1
General Information This chapter describes basic maintenance tasks you can perform on the printer.
• Waste Toner Box • Installation Guide Note Do not remove the toner container from the carton until you are ready to install it in the printer. Understanding Messages Requesting Toner Container Replacement The printer displays messages for individual colors at two stages of toner usage.
Replacing the Toner Container This section explains how to replace the toner containers. When replacing the toner container of any color, always replace the waste toner box at the same time. If this box is full, the printer may be damaged or contaminated by the waste toner that may spill over the box. CAUTION Do not attempt to incinerate parts which contain toner. Dangerous sparks may cause burns.
Plastic Bag 3 Put the old toner container in the plastic bag (contained in the toner kit) and discard it later according to the local code or regulations for waste disposal. 4 5 Take the new toner container out of the toner kit. 6 Set the new toner container in the printer as shown in the figure below. 7 Push down on the top of the toner container to install it firmly in place.
Replacing the Waste Toner Box Replace the waste toner box when the Check waste toner box message is displayed. A new waste toner box is included with the toner kit. The waste toner box needs to be replaced before the printer will operate. 1 Open the left cover. 2 While holding the waste toner box, press the lock lever and then gently remove the waste toner box. Left Cover Note Remove the waste toner box as gently as possible so as not to scatter the toner inside.
5 Open the cap of the new waste toner box. 6 Insert the new waste toner box as shown in the figure. When the box is set correctly, it will snap into place. 7 Make sure that the waste toner box is correctly inserted and close the left cover. Cap New Waste Toner Box New Waste Toner Box After replacing the toner containers and the waste toner box, clean the paper transfer unit. For instructions, refer to Cleaning the Printer on page 3-8.
Cleaning the Printer The paper transfer unit should be cleaned each time the toner container and waste toner box are replaced. To maintain optimum print quality, it is also recommended that the inside of the printer be cleaned once a month as well as when the toner container is replaced. It should also be cleaned if streaking or lines appear on printed copies, or if printouts appear faint or blurred.
3 Wipe away the paper dust on the registration roller and the paper ramp using the dry cloth. Paper Transfer Unit Duplex Unit Dry Cloth Paper Ramp Transfer Belt (Black) Registration Roller (Metal) Transfer Roller (Black) Note Be careful not to touch the black transfer roller and black transfer belt during cleaning as this may adversely affect print quality. 4 Push the front cover back in completely. Note Take care not to get your hands caught in the front cover when you close it.
3-10 Maintenance
4 Troubleshooting This chapter contains explanations on the following topics: General Guidelines Print Quality Problems Error Messages Clearing Paper Jams 4-2 4-3 4-6 4-11 If a problem cannot be corrected, contact your service technician.
General Guidelines The table below provides basic solutions for problems you may encounter with the printer. We suggest you consult this table to troubleshoot the problems before calling for service. Symptom Check Items Print quality is not good. Refer to Print Quality Problems on page 4-3. Paper is jammed. Refer to Clearing Paper Jams on page 4-11. Nothing lights on the operation panel Check that the power cord is properly even when power is turned on and the plugged into the power outlet.
Print Quality Problems The tables and diagrams in the following sections define print quality problems and the corrective action you can conduct to solve the problems. Some solutions may require cleaning or replacing parts of the printer. If the suggested corrective action will not solve the problem, call for service. Printed Results Corrective Action Skewed-color printout Conduct color registration using the printer operation panel.
Printed Results Corrective Action Black or white vertical streaks Check the operation panel for toner. If the Toner low C,M,Y,K message is displayed with color description, install a new toner kit for the color. To replace the toner container, refer to Toner Container Replacement on page 3-2. Clean the main charger units. For details, refer to LSU/Charger (LSU/Main charger cleaning mode setting) section of the Advanced Operation Guide. Direction of Paper Feed Faint or blurred printing Refresh drum.
Printed Results Corrective Action Grey background Clean the main charger units. For details, refer to LSU/Charger (LSU/Main charger cleaning mode setting) section of the Advanced Operation Guide. Conduct color calibration either by switching the printer off then on or using the printer operation panel. For details, refer to Adjust/Maintenance (Adjust/Maintenance selection/ setting) section of the Advanced Operation Guide. Dirt on the top edge or back of the paper Check the paper chute and the ramp.
Error Messages The following table lists errors and maintenance messages that you can be dealt with by yourself. If Call service appears, turn off the printer, disconnect the power cord, and contact your service technician. If Call service or Error.Power off. is displayed, turn off the printer then turn it back on to see if the printer has recovered. If the printer has not recovered, turn off the printer, disconnect the power cord, and contact your service representative or authorized service center.
Message Corrective Action Device busy This message is displayed when Remove Device was selected while a USB memory was being used. The previous screen is displayed again 1 or 2 seconds. Duplex disabled Press GO You attempted to print with a paper size and paper type that cannot be used for duplex printing. Press [GO] to print onto one-side of the paper only. Enter Account An account code must be entered. This message is displayed if you try to print from the operation panel (e.g.
Message KPDL error Press GO Corrective Action ## Current print processing cannot continue because of occurrence of KPDL error which is categorized by ##. To print out an error report, display >>Error Report from the menu system, and select On. Press [GO] to resume printing. You can abandon printing by pressing [Cancel]. If Auto Error Clear is set to On, printing will be automatically resumed after a preset period of time.
Message Corrective Action RAM disk error## Press GO A RAM disk error has occurred. Look at the error code given in place of ## and refer to Storage Error Codes on page 4-10. To ignore the RAM disk error, press [GO]. Replace MK Replace Maintenance Kit which is displayed on the message display. Replacement of the maintenance kit is necessary at every 200,000 images of printing and requires professional servicing. Contact your service technician.
Storage Error Codes SSD Errors Code Meaning 03 The SSD is write protected using command operation. Remove the write protection using the command. 04 There is no available SSD space. Delete unnecessary files, etc., in order to free up space. 05 The desired file does not exist in the SSD. Stored the file in the SSD. 10 The file stored in the SSD is write protected using command operation. Remove the write protection using the command.
Clearing Paper Jams If the paper jammed in the paper transport system, or no paper sheets were fed at all, the Paper jam message appears and the location of the paper jam (the component where the paper jam has occurred) is also indicated. The printer automatically goes off-line when this message is displayed. Remove jammed paper. After removing jammed paper, the printer will re-start printing. Possible Paper Jam Locations The figure below explains the printer’s paper paths including the options.
General Considerations for Clearing Jams Bear in mind the following considerations when attempting jam removal: CAUTION When pulling the paper, pull it gently so as not to tear it. Torn pieces of paper are difficult to remove and may be easily overlooked, deterring the jam recovery. • If paper jams occur frequently, try using a different type of paper, replace the paper with paper from another ream, flip the paper stack over, or rotate the paper stack 180 degrees.
Paper Jam in Printer Paper is jammed at the paper cassette or inside the printer. Remove the jammed paper using the procedure given below. CAUTION Components inside the fuser cover are hot. Do not touch it with your hands as it may result in burn injury. A 1 Press the lever to release the lock. 2 Pull the front cover towards you. 3 If the paper has jammed near the registration roller, as shown in A, remove the paper by pulling it up from the center.
If the paper has jammed inside the duplex unit, as shown in C, lift the duplex unit and remove the paper by holding it in the middle. C Duplex Unit 4 Close the front cover. Paper Jam at Cassette 2 (to 4) Paper is jammed at the paper cassette. Remove the jammed paper using the procedure given below. Pull out the paper feeder and remove the jammed paper.
5 Specifications Note Specifications are subject to change without notice. Item Description Printing Method Electrophotographic four color (CMYK) printing using tandem (4) drum system Printing Speeds Cassette A4: 30 ppm, B5, A5, A6: 27 ppm†, Letter: 32 ppm, Legal: 26 ppm MP Tray A4: 27 ppm, B5, A5, A6: 27 ppm†, Letter: 28 ppm, Legal: 23 ppm Duplex Printing Speed A4: 30 ppm, B5, A5: 27 ppm†, Letter: 32 ppm, Legal: 14 ppm Resolution 600 dpi First Print Out Time B/W : 8.
Item Paper Types† Paper Feed Source Capacity Description Cassette Plain, preprinted, bond, recycled, rough, letterhead, color, prepunched, high quality, (Optional Paper and custom Feeder PF-500) Cassette (Optional Paper Feeder PF-510) Plain, preprinted, labels, bond, recycled, rough, letterhead, color, prepunched, envelope, cardstock, coated, thick, high quality, and custom MP Tray Plain, transparency, preprinted, labels, bond, recycled, vellum, rough, letterhead, color, prepunched, envelope, cardstock
We recommend the use of our own brand supplies. We will not be liable for any damage caused by the use of third party supplies in this machine.
TA Triumph-Adler GmbH Betriebsstätte Norderstedt Ohechaussee 235 22848 Norderstedt Germany First edition 2013.
