User's Guide

14Chapter 3 XpressKEY Operations
OPERATIONS
Open/Release Shackle
Each keybox has a four-digit shackle code. Release the shackle to place it on, or remove it from, a listing. After
the shackle code is entered, a prompt appears asking for a reason for the shackle release. The reason choices
are:
• Put on a listing
• Remove from a listing
• Relocate on same listing
• None of the above
Note: For an iBox BT LE and iBox BT keybox, press down on the shackle then pull up on the shackle to
remove it completely. For a classic iBox keybox, the shackle pops open and swings on one side. To fully
remove the iBox shackle perform the remove shackle operation twice.
1. On the main screen tap
the Shackle icon.
2. Type in the shackle
code and tap Enter.
3. Select a reason, press
Enter, and follow the
prompts.
4. Point the key at the
keybox.
5. Push down on the
shackle.
6. Then pull up to
remove the shackle.
7. Tap Done to exit.
PRESS
FIRMLY
PULL UP
TO RELEASE
Keybox Assistant
Boards and associations must rst opt-in to this feature for it to be active. The Keybox Assistant uses Global
Positioning System (GPS) to help you assign your keybox. It helps increase the number of keyboxes that have
a listing ID or addresses assigned to them. When more keyboxes are associated with a listing ID or address,
reports are more informative and are easier to distinguish which of your listings have activity.
If Put on a listing is selected, a prompt to enter a house address displays. When the property or house number
(or partial number) is entered, the Supra system looks at new MLS listings entered by you and attempts to