User's Guide

15Chapter 3 XpressKEY Operations
OPERATIONS
nd the corresponding MLS number. If there are several
possibilities, an email is sent to you asking you to select
the link of the correct address for the listing. If a match is
made, you will receive an email telling you the assignment
has been made. If no match is found, the keybox remains
unassigned.
Tip: Assign a listing ID or address
to the keybox when you place it on
property to make sure your reports and
email notices are more complete.
1. On the main screen tap
the Shackle icon.
2. Type in the shackle
code and tap Enter.
3. Select a reason, press
Enter, and follow the
prompts.
4. Add the property
address and tap
Enter.
5. Point the key at the
keybox.
6. Push down on the
shackle.
7. Then pull up to
remove the shackle.
8. Tap Done to exit.
PRESS
FIRMLY
PULL UP
TO RELEASE
Flashlight
Tap the Flashlight button to activate the LED ashlight. Tap it again to turn it off.
1. Tap the Flashlight icon
to turn it ON.
2. Tap the Flashlight icon
to turn it OFF.