User's Manual

GE AccessSmart 313 Last Update July 6, 2005

7. MA: MA is the Reader#1 (Built-in Reader) Operating Mode for the cardholder. If you put ‘1’ for MA,

Reader#1 is always operating on RF Only Mode.

‘0’ – System Operating Mode [F2 SETUP MENU]Æ [READER#1 MODE]

‘1’ – ID Only Mode

‘2’ – ID + Password Mode

8. MB: MB is the Reader#2 (Exit Reader) Operating Mode for the cardholder. If you put ‘1’ for MB,

Reader#2 is always operating on RF Only Mode.

‘0’ – System Operating Mode [F2 SETUP MENU]Æ [READER#2 MODE]

‘1’ – ID Only Mode

‘2’ – ID + Password Mode

9. LV: LV is the Output Operating Level for the cardholder. Output operating time can be set for each user.

To setup Output operating time for each level, refer to the Output Setting on the [F7 SETUP MENU].

‘0’ or ‘1’ – Level #1

‘2’ – Level #2

‘3’ – Level #3

‘4’ – Level #4

9.4.2 ID DELETION

. ☞ Registered ID will be deleted in the controller by presenting the card or input the ID number from the keypad.

Present the card to be deleted. The ID number will appear on the LCD. If you don’t have the card, input 8digit

ID number and <ENT> key from the keypad. If the ID number is found, the ID will be deleted and display “ID

DELETED”. If the ID number is not found, the display will show “ UNREGISTERED ID”. You may repeat ID

DELETION many times.

GE AccessSmart 313 Last Update July 6, 2005

9.4.3 ID LIST

9.4.4 MASTER ID REGISTRATION

MASTER ID REGISTRATION BY CARD

MASTER ID REGISTRATION BY PIN

. LCD will display 5digit ID Index, 8digit I☞ D number, 4digit Password, T/S for Reader#1(TA) and

Reader#2(TB), accessible Readers(RD), operating mode for Reader#1(MA) and Reader#2(MB), the output

level(LV).

. ☞ “EMPTY” message will be displayed if there is no registered user ID.

. ☞ “FIRST ID” message will be displayed if the LCD displays the ID on the top of the list.

. ☞ “LAST ID” message will be displayed if the LCD displays the ID on the bottom of the list.

. ☞ The default Master ID ‘01’ is “00000000” and Password is not used.

There are total 10 Master IDs (from “01” to “10”) can be stored in the unit.