User's Manual

GE AccessSmart 313 Last Update July 6, 2005

9.6.7 OUTPUT TIME SCHEDULE SETTING

9.6.8 INPUT TIME SCHEDULE SETTING

. You can ☞ link a T/S Code to each Output. The default T/S Code is “00” which means no T/S is applied to the

Outputs. This setting is very useful when you want to open the door for a Time Interval.

Press <ENT> key to link a T/S Code to the Output then enter 2digit T/S Code for each Output.

DR: Door Relay Output T/S Code

AR: Alarm Relay Output T/S Code

T1: TTL#1 Output T/S Code

T2: TTL#2 Output T/S Code

BZ: Buzzer Output T/S Code

. You can ☞ link a T/S Code to each Input. The default T/S Code is “00” which means no T/S is applied to the

Inputs. This setting is very useful when you want to activate PIR sensor input for a Time Interval.

Press <ENT> key to link a T/S Code to the Input then enter 2digit T/S Code for each Input.

EX: EXIT Button Input T/S Code

DC: Door Contact Sensor Input T/S Code

I1: Aux Input#1 T/S Code

I2: Aux Input#2 T/S Code

TP: Tamper Switch Input T/S Code

GE AccessSmart 313 Last Update July 6, 2005

9.7 F7 SETUP MENU