User's Manual

GE AccessSmart 313 Last Update July 6, 2005
55
9.8 F8 SETUP MENU
9.8.1 SYSTEM INITIALIZE
☞. This operation will initialize the GE313. Press <ENT> key, if an initialization is needed (First time installation
or resetting in the event of a malfunction).
CAUTION: Initializing will erase all stored data in the memory.
☞. Press the <1> key to initialize or <0> key to cancel the operation.
☞. The “WAIT..”message appears while the system is being initialized.
After the initialization, GE313 will return to the Setup menu.
GE AccessSmart 313 Last Update July 6, 2005
56
9.8.2 EVENT CLEAR
9.8.3 ID CLEAR
9.8.4 MASTER ID CLEAR
☞. When you want to delete all User IDs (Card IDs), you can clear all User IDs from the memory. Press <ENT>
key, then press the <1> key to clear all User IDs or <0> key to cancel the operation.
CAUTION: Before clearin
g
all User IDs, make sure that the re
g
istered User ID is no lon
g
er used otherwise
you may lose all registered User IDs.
☞. When the event memory is full or when you want to change ID COUNT, you can clear the event memory in
this menu. Press <ENT> key then press <1> key to clear event memory or <0> key to cancel the operation.
CAUTION: Before you clear the events, make sure that the stored events is not necessar
y
to u
p
load to the
host PC otherwise you may lose important data.
☞. When you want to delete all Master IDs, you can clear all Master IDs from the memory. Press <ENT> key,
then press the <1> key to clear all Master IDs or <0> key to cancel the operation.
CAUTION: Before clearin
g
all Master IDs, make sure that the re
g
istered Master ID is no lon
g
er used
otherwise you may lose all registered Master IDs.