User's Manual

GE AccessSmart 313 Last Update July 6, 2005
57
9.8.5 TIME SCHEDULE CLEAR
9.8.6 DEFAULT SETTING
☞. When you want to delete all Time Schedules (01~10), all Holiday schedules(01~10), Holiday code, Reader#1
Mode T/S code and Reader#1 Mode T/S code, you can clear them from the memory. Press <ENT> key and
press the <1> key to clear all T/S or <0> key to cancel the operation.
CAUTION: Before you clear all T/S, make sure that the stored T/S is no longer used, otherwise
y
ou ma
y
lose all stored T/S in the memor
y
.
☞. When you want to delete all Default setting value, you can clear them from the memory. Press <ENT> key and
press the <1> key to reload all default setting value clear all T/S or <0> key to cancel the operation.
CAUTION: Before
y
ou clear all Default settin
g
value(Reader mode, Board ID etc..), make sure that the
stored system setting value is no longer used, otherwise you may lose all stored s
y
stem settin
g
value in the memory.
GE AccessSmart 313 Last Update July 6, 2005
58
APPENDIX
A. THE RELATION BETWEEN INPUT AND OUTPUT (DEFAULT)
* Default Output Setting for Input Sources
* Index No. [1] ~ [6]:
The value indicates operation time (second) of each output for the input signal.
* Index No. [7]:
The value indicates time schedule code (index) that each output operation has to
be applied.
* Index No. [8]:
The value indicates the time schedule code (index) that each input #1(Exit
button) ~#5 operation has to be applied.
OUTPUT
INPUT
Door
Relay
(DR)
Alarm
Relay
(AR)
TTL#1
(T1)
TTL#2
(T2)
Buzzer
(BZ)
[1] EXIT BUTTON 03 00 00 00 00
[2] DOOR CONTACT 00 99 00 00 00
[3] AUX Input #1 00 00 00 00 00
[4] AUX Input #2 00 00 00 00 00
[5] TAMPER ALARM 00 99 99 99 99
[6] DURESS ALARM 00 00 00 00 00
[7] OUTPUT TIME SCHEDULE 00 00 00 00 00
[8] INPUT TIME SCHEDULE 00 00 00 00 00