User's Manual

GE AccessSmart 314 Last Update July 6, 2005

9.5.3 HOLIDAY CODE

9.5.4 READER#1 MODE TIME SCHEDULE

9.5.5 READER#2 MODE TIME SCHEDULE

READER#2 MODE TIME SCHEDULE setting is the same as 9.5.4 READER#1 MODE T/S setting.

☞. Holiday Code is to link the Holiday Schedule to the Time Schedule. T/S has 5 Time Intervals for holidays and

this Time Intervals are only applied to the dates of this Holiday Schedule. Default Holiday Schedule Code is

‘00’ which means no holidays are applied to T/S.

Use <4> or <6> key to scroll up and down the T/S Code (01~10) and press <ENT> key to enter 2digit Holiday

Schedule Code and press <ENT> key to store Holiday Index to the memory.

Press <ESC> ke

to return to the menu.

☞. There are 3 system operating mode, RF Only Mode, RF+F/P Mode and RF+PW+F/P Mode. You can setup one

of the system operating mode from [F2 SETUP MODE]->[R1 MODE SETTING] menu. However, you want

to apply different operating mode for a certain Time Interval for all users. For example, you want to access the

door by just presenting the card for the time from 09:00 to 17:00 and you want to use Fingerprint verification

for the rest of the time. In this case, setup [R1 MODE SETTING] to RF+F/P Mode which is for the system

operating mode and program “01” T/S Code which includes a Time Interval 09:00-17:00 then link “01” T/S

Code to this function, R1 MODE T/S setting here.

To link a T/S Code (01~10) to Reader#1 Mode, press <ENT> key. Enter 2digit T/S Code and press <ENT>

key to store T/S Code to R1 MODE to the memory.

Press <ESC> key to return to the menu.

. There are 3 system operating mode, ☞ ID Only Mode, ID + Finger(Password) Mode and ID + PW + Finger

Mode.

You can select one of the system operating mode from [F2 SETUP MENU]->[READER#1 MODE SETTING]

however, you want to apply different operating mode

‘2’ – RF + Finger Mode

‘3’ – RF + PW + Finger Mode

GE AccessSmart 314 Last Update July 6, 2005

9.6 F6 SETUP MENU