User's Manual

GE AccessSmart 314 Last Update July 6, 2005

9.9 F9 SETUP MENU

9.9.1 GET FINGERPRINT SCANNER GAIN

9.9.2 SET FINGERPRINT GAIN

. You can ☞ get the current brightness of the fingerprint scanner.

Higher gain is more darkness.

CAUTION : If you change the gain, it will result a bad fingerprint verification. Do not chan

e unless

needed.

GE AccessSmart 314 Last Update July 6, 2005

9.9.3 DUAL FINGERPRINT MODE

9.9.4 ADAPTIVE MODE

9.9.5 AUTOMATCH MODE

. You can ☞ set brightness of the fingerprint scanner. The value for the gain is 1, 2, 4 or 8. The default gain is 4.

CAUTION : If you change the gain, it will result a bad fingerprint verification. Do not chan

e unless

needed.

. ☞ In DUAL FINGERPRINT MODE, you can register two fingerprints for one user ID. Default is UNUSE.

But Dual Fingerprint Mode is higher False Acceptance Rate (FAR) measured.

.☞ In ADAPTIVE MODE, scanning quality is better than normal mode and also it checks latent finger..

But scanning speed is longer than normal mode. Default is USE.

. ☞ Automatch Mode is an IDENTIFICATION MODE, you can use 1:N Identification. You can Identify ID by

only putting finger to the scanner. Automatic Touch Sensor is optional purchase.