User's Manual

Add Cameras to a Wi Fi Network

RECOMMENDED METHOD

(using temporary Ethernet connection for setup)

Note: It is highly recommended to use a dedicated router for all

UltraSync installations that include cameras.

• Removes concern of homeowners changing their Wi-Fi

Password, resulting in a call to update.

• Maintains privacy for the homeowner’s for Wi-Fi Network

Password.

• Reduces the risk of local communication issues between the

router, cameras and UltraSync Panels.

1. Apply power to the camera using the included transformer.

Note: Power up may take 1-2 minutes

2. Connect the camera to your router with an Ethernet cable.

3. Launch TruVision Device Manager.

Note: Use the included CD or download at www.interlogix.com/video

4. Verify that the camera is found in the main camera selection window.

5. Select the camera you would like to configure.

6. In the Password field, enter the default password of 1-2-3-4 and

press Save.

7. In the main camera selection window, select the camera you

would like to configure and double click the IPV4 Address to

launch TruVision IP Camera Configurator in a browser.

Note: You may also manually enter the camera’s IP Address in

your desired internet browser.

8. Enter the default Username and Password and select Login.

Note: A pop-up may appear instructing an immediate password

change. Select OK.

9. Select Configuration on the top menu.

10. Select Network on the left menu.

11. Select Wi Fi on the middle tab.

12. Select the desired Wi Fi network from the Wireless List.

13. Enter Wi Fi Network Passphrase in Key 1 Section.