User's Manual

20 P/N 466-5236 • REV B • ISS 28APR16 © 2016 United Technologies Corporation. All rights reserved
Reboot Cameras
8. Reopen TruVision IP Camera Configurator (Browser)
9. Select System from the menu on the left.
10. Select Maintenance from the middle menu.
11. Select Reboot.
i) Select OK when asked if you want to reboot the unit.
ii) Note: Reboot may take 1-2 minutes.
12. Disconnect the Ethernet cable from the camera.
13. Go to the Cameras Tab in the UltraSync App to verify live
video.
Your Camera installation is now complete!
View Live Stream and Latest Clip
1. Click Cameras tab on bottom of the screen.
2. All available cameras will be shown.
3. Click Live Stream to view a live feed of a specific camera.