User's Manual

10 P/N 466-xxxx-EN • REV 03 • ISS 25SEP17 © 2017 United Technologies Corporation. All rights reserved.
Installation Step 2
To mount the doorbell camera:
1. With the rear of the doorbell assembly facing
down, gently pull the faceplate off of the
assembly. (can we add drawing here?)
2. Align the cable hole on the mounting template
with the cable hole on the mounting surface.
3. If mounting the doorbell on a stucco, concrete, or
brick surface: Drill wall anchor holes according to
the drill template using the appropriate drill bit.
Press each anchor into the wall after drilling the
holes.
If installing the doorbell on a wood surface or into
siding: proceed to “Installation Step 3” .