User's Manual

12 P/N 466-xxxx-EN • REV 03 • ISS 25SEP17 © 2017 United Technologies Corporation. All rights reserved.
1. Wires
2. Connector
3. 10Ω Resistor
Installation Step 4
To finish installing the doorbell camera:
1. Route the cables and insert the cables and
power connector into the wall.
2. Align the screw holes on the doorbell body with
the drilled holes or wall anchors.
3. Mount the doorbell body to the wall using the two
screws provided.
4. Affix the faceplate to the doorbell body using the
security screw and security screw wrench
provided.
1. Wall screws
2. Security screw
3. Turn the power supply to the doorbell camera
back on and proceed to “Getting started”
.