User's Manual

P/N 466-xxxx-EN • REV 03 • ISS 25SEP17 © 2017 United Technologies Corporation. All rights reserved. 15
Add camera to the network via WPS
A WPS-enabled wireless router is required to add a
camera using the WPS function.
1. Press the WPS button on the router.
2. Within 120 seconds of pressing the WPS button on
the router, press the WPS button on the camera for
approximately five seconds. See “Camera
description” on page 5 and 6 for WPS button and
LED locations.
3. The blue LED on the camera flashes rapidly to
indicate that it starts the WPS process. White LED
will be on when the camera has joined the wireless
network.
TruVision Device Manager
The TruVision
®
Device Manager is standalone
software that can discover TruVision IP devices on a
network.
In addition to finding device IP addresses, camera
password can be activated, IP settings can be
changed and camera FW can be update through
Device Manager.