Installation Guide

ManualsBrandsUTC Fire & Security ManualsElectronicsRemote Control Security Device

NX-1700E Card Reader

IX. PROGRAMMING WORKSHEETS

LOC PG DESCRIPTION DEFAULT DATA

9 SINGLE SCAN FUNCTION

Seg

1 Single Scan Function

2 Double Scan Function

3 Single Scan Hold Function

240

10 Card Serial Numbers

Do not edit these locations!

0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

00000

0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

00000

0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

00000

0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

00000

00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

00000

00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

00000

00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

241

10 X-10 ADDRESS

Seg

1 Module Number

2 House Code

3 Single Scan Function

4 Double Scan Function

5 Single Scan Hold Function

242

11 OPTIONS AND READER PARTITION

Segment 1 – System Options

1= "On" if enabled for User Card

Programming

2= "On" if optical tamper enabled

3= "On" if buzzer follows keypad buzzing

4= "On" if ding-dong chime enabled (Opt 3

& chime must be enabled)

5= “On” if relay driver function logs as

Code Entry

6= Reserved

7= Reserved

8= Reserved

Segment 2 – LED1 (Green) Options

1,2

1= "On" follows system Ready status

2= "On" to toggle with the Relay Driver

3= "On" if inverted

4= Reserved

5= Reserved

6= Reserved

7= Reserved

8= Reserved

Segment 3 – LED2 (Red) Options

1= "On" follows system Armed status

2= "On" to toggle with the Relay Driver

3= "On" if inverted

4= Reserved

5= Reserved

6= Reserved

7= Reserved

8= Reserved

X-10 ADDRESS CODES

0=A 4=E 8=I 12=M

1=B 5=F 9=J 13=N

2=C 6=G 10=K 14=O

3=D 7=H 11=L 15=P

0=All units off 4=Dim

1=All lights on 5=Bright

2=On 6=All lights off

3=Off Other=Reserved