2170 POS System 2170 User Guide Thank you for selecting UTC RETAIL’s innovative Model 2170 Point of Sale solution! This guide is designed to acquaint you with the features and functionality of the 2170 Point of Sale System. © 2013 UTC RETAIL. All rights reserved.
170 POS System User Guide All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or otherwise, without the prior written permission of UTC RETAIL. This User Guide was prepared by UTC RETAIL for use by Qualified Service Personnel only. All attempts have been made to ensure that the information presented in this manual is correct.
Contents 2170 POS System User Guide................................................................................................... 2 Product Information .................................................................................................................... 4 2170 POS System Components .......................................................................... 4 Peripheral Support...............................................................................................
Product Information The 2170 Touch Screen POS Workstation is designed for use in restaurants, convenience stores, cafeterias and other specialty retail establishments. It is highly configurable, has easy access to connectors, and includes a large selection of interface ports for connectivity to printers, cash drawers, scanners, keyboards, and other peripherals.
2170 POS System Specifications 2170 Processor System Memory Hard Drive Front Side Bus Graphics SVGA RS-232 USB Interface Ports Network Port Customer Displays (optional) MSR (optional) Keyboard options Cash Drawer Dimensions (W x D x H) Operating Systems ® Intel Atom™ D2550 (1.86 GHz) 2GB DDR3-1066 (up to 4 GB) 320GB (min), 60GB (min) SSD optional 800 MHz ® Intel Integrated Yes 4 4 10 / 100 / 1000 Realtek LAN 1. 2-line x 20 character PD1200 VFD – free standing 2. 2-line x 20 character VFD – integrated 3.
COM Ports There are 4 COM ports on the 2170; they are standard RS-232.The COM3 and COM4 ports have been configured to supply +5VDC power to pin 9 of their DB9 connector. COM3 and COM4 may supply up to 0.5A of current; do not exceed this limit. Note: COM3 and COM4 may also be configured for pin 9 to be RI (ring indicator) or to supply +12V 0.5A. This configuration must be performed at the UTC RETAIL facility. The table below summarizes the RS232 DB9 pin definitions: PIN NO.
Cash Drawer Interface The 2170 POS I/O panel as a single cash drawer port which is capable of driving a 24VDC cash drawer. The interface is compatible with the APG Cash Drawer (http://www.cashdrawer.com/ ) CD-005A specification, seen below.
Connect Power Cable Place the 2170 POS face down on a clean, soft surface, ensuring you do not scratch the front bezel or the touchscreen. Plug the supplied AC cord into the power adapter mounted into the base. See photo below. Stand the system on its feet and snake the power cable through the cutout in the rear of the base. Figure 3, AC Power Cord Attachment Expansion Options None, the system does not accept any internal expansion cards.
System Installation Guide Please refer to the 2170 POS System Installation Guide, which may be downloaded from the UTC RETAIL’s website at www.utcretail.com. Note: Consideration should be taken to ensure that none of the unit vents are blocked. Blocking the vents may cause damage to the unit. The 2170 POS has no internal cooling fans and relies on ambient air to provide system cooling. Please call UTC RETAIL’s Technical Support at 800.349.
