TruVision IP Dome Open-Standards Quick Start Guide P/N 1076512A-EN • REV 1.
Copyright © 2011 UTC Fire & Security. All rights reserved. Trademarks and Interlogix, TruVision brand and logo are patents trademarks of UTC Fire & Security. Other trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of the respective products. Manufacturer UTC Fire & Security Americas Corporation, Inc. 2955 Red Hill Avenue, Costa Mesa, CA 92626-5923, USA Authorized EU manufacturing representative: UTC Fire & Security B.V.
Content Graphics 2 Introduction 6 Package contents 6 Installation environment 6 Camera dimensions 6 Setting up the camera 7 Connecting the devices 7 Accessing the camera over the internet 8 Overview of the camera Web browser 9 Network and streaming configuration 10 Specifications 11 Quick Start Guide 1 EN
Graphics EN 2 Quick Start Guide
Quick Start Guide 3 EN
EN 4 Quick Start Guide
Quick Start Guide 5 EN
Introduction This pocket guide provides basic information on installing the TruVision IP dome and wedge dome open-standard cameras. For detailed information on installing and using the cameras, please refer to the user manual.
Setting up the camera Note: If the light source where the camera is installed experiences rapid, wide variations in lighting, the camera may not operate as intended. For detailed instructions, please refer to the user manual. To quickly put the camera into operation: 1. Prepare the mounting surface. 2. Connect the required cables to the camera. 3. Mount the camera to the ceiling using the appropriate fasteners. 4.
Wedge dome cameras: See Figure (Wedge dome camera connections). 1. Power input connector. Connect +12 VDC power supply. Optional. 2. Ethernet RJ45 PoE connector. Connect to the network devices. 3. Lens. 4. Power LED. 5. Lens positioning screws. 6. Network status LEDs. 7. Reset switch. Click to reset all parameters to factory default. Accessing the SDHC card Insert an SDHC card up to 32GB for local storage in the dome cameras (see Figure , item ). The card is not supplied with the camera.
3. Click OK. The Web browser window appears in live mode. See Figure . Overview of the camera Web browser See Figure (Camera Web browser interface). Item Name Description 1. PTZ controls For future use. 2. Live view Click to view live video. 3. Playback Click to play back video. 4. Log Click to search for event logs. There are four main information types: All, Alarm, Notification and Operation 5. Configuration Click to display the configuration screen for setting up the camera. 6.
Item Name 15. Audio setting Description Click to start/stop bi-directional audio. Note: You need to have a microphone attached to your PC to be able to send out audio. 16. Audio on/off Click to turn the audio function on or off. Network and streaming configuration In the camera Web browser screen click the Configuration button on the toolbar to display the configuration screen. See Figure (Configuration screen). Refer to the User Manual for detailed information on configuring the cameras.
Configuration folders Description Serial settings Defines the RS-485 and RS-232 communication settings. Alarm parameters Defines how the camera handles alarms such as input type, notification of alarms, and response schedules and duration. Deployment time Defines the schedules during which events are registered. User management Defines who can use the camera, their passwords and access privileges. HDD management Defines how to format the SDHC card used in the camera.
Weight 1.3 kg (2.8 lbs) Environmental rating Indoor vandal-resistant Wedge dome cameras: Electrical Power consumption 4 W max. Miscellaneous Dimensions (L × W × H) 100 × 98 × 47 mm (3.94 ×3.84 ×1.83 in.) Weight 0.5 kg (1.1 lbs.) Environmental rating IP66 vandal-resistant All cameras: Electrical Voltage input 12 VDC, PoE (IEEE 802.3af) I/O connection DC jack flying lead, RJ45 flying lead Network Protocols TCP/IP, HTTP, DHCP, DNS, DDNS, RTP/RTCP, PPPoE, SMTP, NTP Ethernet/IP CoS 802.
Quick Start Guide 13 EN
EN 14 Quick Start Guide
