User manual

20BAppendix E: Configuring the DVR settings
TruVision DVR 60 User Manual 145
Task Keypad action Further information
 Playback functions
Search for recorded video
Press
.
Once password is entered, the
Advanced Search menu appears.
Instant playback Press when in full screen. Instant playback of the currently
selected camera. Default time is 1
minute.
Other cameras listed on-screen can
only be accessed using the mouse.
Stop playback Press to stop playback and
return to live mode.
Pause playback Press to pause playback.
Press to restart.
Replay the current file. press aux4 to replay the
current file.
Starts at the beginning of the file.
Change playback speed Press and hold esc and then
press the left/right arrow
buttons
Jump 30 seconds forwards or
backwards during playback
Press and hold esc and then
press the up/down arrow
buttons
Selecting an IP camera using the keypad
The TVR 60 can support up to 16 analog and eight 4-CIF IP cameras. To be able
to control up to 24 cameras using the keypad, you may need to change the
number of TVR 60 camera inputs controlled by the keypad. The default number
of TVR 60 camera inputs controlled by the keypad is 16.
To change the number of TVR 60 camera inputs controlled by the keypad:
1. Hold down the Enter button ( ) until a beep sounds and then enter the
following code: 1 4 7 6. Push the seq button to confirm.
2. Scroll through the menus with the
button until this menu appears:
3. Enter the DVR address to be configured and press .
4. Scroll through the menus with the button until this menu appears:
5. Press the up/down arrow buttons to navigate to SYM DVR.
6. Scroll through the menus with the button until this menu appears: