User manual

TruVision DVR 60 User Manual 47
Chapter 7
Controlling a PTZ dome
camera
You can control PTZ dome cameras using the buttons on the front panel, the
keypad, and IR remote control as well as using the PTZ menu accessed with the
mouse. Access to PTZ functions may require a password.
Configuring PTZ settings
Use this screen to configure the PTZ dome cameras. Each camera must be set
up individually. Cameras must be configured before they can be used.
Ensure that the RS-485 port on the rear panel, which is used to set up the PTZ
dome cameras, and PTZ dome cameras are correctly connected.
Note: If a camera does not work correctly after configuring the DVR, check the
parameters entered.
Figure 21: PTZ settings screen