User manual

6BChapter 7: Controlling a PTZ camera
52 TruVision DVR 60 User Manual
To set up a preset tour:
1. Enter PTZ mode by left-clicking the mouse on the desired camera image and
selecting the PTZ icon in the cameo shortcut menu.
- Or -
Press the front panel joystick for Enter.
The PTZ control panel appears.
2. Click the Preset Tour button on the PTZ control panel. The PTZ Control
screen appears with the Preset Tour tab open.
3. In the Preset Tour No. box select a preset tour to set.
4. In the list of presets, select the desired pre-programmed presets.
5. Click the Set button to enter the preset tour configuration menu. A preset tour
should have at least two enabled presets.
6. Set the step number, dwell time, and speed.
7. Click the OK button to return to the preset tour configuration men.
8. Repeat steps 2 to 7 to configure other steps.
9. After all steps have been configured, click OK to save and return to PTZ
mode.
To delete a preset tour:
1. Enter PTZ mode by left-clicking the mouse on the desired camera image and
selecting the PTZ icon in the cameo shortcut menu.
- Or -
Press the front panel joystick for Enter.
The PTZ control panel appears.
2. Click the Preset Tour button on the PTZ control panel. The PTZ Control
screen appears with the Preset Tour tab open.
3. Select a preset tour number and click the Clear button.
Note: The Clear All button deletes all presets.
4. Click the OK button to save changes and return to PTZ mode.
Setting a shadow tour
The Shadow Tour function remembers the PTZ dome camera movement track.
Only one shadow tour can be set up.
Note: The PTZ dome camera must be able to support a shadow tour function.
To set up a shadow tour:
1. Enter PTZ mode by left-clicking the mouse on the desired camera image and
selecting the PTZ icon in the cameo shortcut menu.