User manual

7BChapter 8: Playing back a recording
TruVision DVR 60 User Manual 59
To playback from more than one camera:
1. In live mode select the camera display for playback.
2. Press the Search button on the remote control or front panel, or right-click the
mouse and select the Advanced Search button. The Advanced Search
screen appears.
3. Use the front panel joystick to move the cursor to a camera check box and
press Enter to select the desired cameras. You can also use the mouse to
click a camera’s check box.
4. Using the joystick, move the cursor to each of the search parameters and
select the options required. In the option box press Enter on the front panel to
accept the change. You can also use the mouse to modify the parameters.
5. Click the Search button. The list of search results appears.
6. Using the joystick, move the cursor to the first line of the search results and
press Enter to select. The line is highlighted green. To select a different
search result line, move the cursor to the desired line and press Enter again.
You can also use the mouse to select a search result line.
Note: Only one line can be selected.
7. Click the Play button. The Synchronous Playback Cameras screen appears
which lists all the selected cameras. (The example below shows analog
cameras only.)
8. Select up to four analog or two IP cameras to playback simultaneously and
press the OK button.
The selected cameras play back immediately.
9. To stop playback, right-click the mouse and select the Exit button in the
playback control panel.
To hide the playback control panel, right-click the mouse and select the
Control Panel button in the playback control panel.
10. When playback has finished, click Exit. Another search result can be
selected.