Installation Guide

LIGHTING

Model # MPL1001-LED15K840

Portable Worklight

Installation Instructions

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-866-492-6566.

Item Number

Purchase Date

ATTACH YOUR RECEIPT HERE

www.energeticlighting.com

PAGE 1
Model # MPL1001-LED15K840 L I G H T I N G Portable Worklight Installation Instructions L I G H T I N G ATTACH YOUR RECEIPT HERE Item Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-866-492-6566. www.energeticlighting.
PAGE 2
SAFETY INFORMATION PACKAGE CONTENTS CAUTION • This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTICE • This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
PAGE 3
SAFETY INFORMATION - To avoid electrical shock, do not use near water or in areas where water may accumulate. Keep work light at least 16 ft. from pools or spas. Keep plugs dry. Use only Ground Fault Circuit Interrupter (GFCI) protected receptacles when using this work light in wet or damp locations. Receptacles are available with built-in GFCI protection and are to be used for this measure of safety. - Always unplug work light and allow lamp head to cool. - The work light lamp heads get HOT very quickly.