Installation Guide

NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on. The
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
32
PACKAGE CONTENTS
SAFETY INFORMATION
•
-
-
-
-
•
B
C
C
Lowes.com
Lowes.com
HARDWARE CONTENTS (shown actual size)
Please read and understand this entire manual before attempting to assemble, operate or
install the product. Failure to do so could lead to electric shock, fire or other injuries that
could be hazardous or even fatal.
Be sure the electricity to the wires you are working on is shut off. Either remove the fuse or
turn off the circuit breaker.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
CAUTION:
The fixture body is one piece. Do not disassemble it.
This product can NOT be used with a dimmer switch.
The installation of this product requires two installers to ensure proper mounting of fixture.
NOTICE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
SAFETY INFORMATION
•
•
•
•
•
•
INSTALLATION INSTRUCTIONS
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not
attempt to assemble the product.
Estimated Assembly Time: 30 minutes (with two adults).
Tools Required for Assembly (not included): Phillips screwdriver, flathead screwdriver, safety
glasses, hammer, pencil, pliers, power drill and 1/8-in. drill bit or 5/32-in. drill bit.
PREPARATION
DD
Wire Nut
Qty. 3
AA
Wood Screw
Qty. 4
BB
Drywall Anchor
Qty. 4
CC
Washer
Qty. 4
PART DESCRIPTION QUANTITY
A Fixture Pan 1
B Pull Chain (preassembled
to Fixture Pan (A))
1
C
D
Diffuser (preassembled
to Fixture Pan (A))
Pull Chain Extension
(preassembled
to Pull Chain (B))
1
1
A
A
D
1
1. Using your fingertips, gently squeeze the diffuser (C)
by one of the end caps on fixture pan (A), then
carefullly free each side of the diffuser (C) from the lip
of the fixture pan (A). Remove the diffuser (C) to
expose the fixture pan (A).