Installation Guide

ManualsBrandsUtilitech ManualsBath2-Sone 70-CFM Light Oil-Rubbed Bronze Bathroom Fan Room with Light

EXISTING CONSTRUCTION (JOIST/ ABOVE CEILING

ACCESS

APPLICATION) INSTALLATION

INSTRUCTIONS

4. Strip 1/2 in.

of

insulation from wire ends. Grip the

wire firmly and push the stripped end

of

the wire

into the open port

of

two-port quick connect (FF)

or

three-port quick connect (GG). Use only one

stripped end

of

the wire per port. Verify the stripped

end

of

the wire is fully inserted to the back

of

two-

port quick connect (FF)

or

three-port quick connect

(GG).

Hardware Used

G Two-port Quick connect B x 3

~

Three-port Quick connect B x 1

5. Place two clips (BB) along the bottom edge

of

each

side

of

the housing (A). Place the housing (A) into

the opening, then mount the housing (A) to the joist.

Note: The clips (BB) will ensure the bottom edge

of

the housing (A)

is

flush with the ceiling board.

Hardware Used

•D

Clip

x4

11

house

house wires

~

~

UTILI

TECH'

]

Low

es

.com i.:J,I

-·-

·