Installation Guide

ManualsBrandsUtilitech ManualsBath2-Sone 70-CFM Light Oil-Rubbed Bronze Bathroom Fan Room with Light

EXISTING CONSTRUCTION

(BELOW

CEILING APPLICATION) INSTALLATION INSTRUCTIONS

3. Connect the wiring according

to

the wiring

diagram.

a.

Connect the black wire from the fan

to

the

black wire from the fan wall switch with two-

port quick connect (FF).

b.

Connect the black wire from the light to the

black wire from the light switch with two-port

quick connect (FF).

c.

Connect the white wire from the fan

to

the

white wire from the light and connect to the

line in from the ceiling with three-port quick

connect (GG).

d.

Connect the ground/green wire from the unit

to

the ground bare wire

in

the ceiling with two

quick connector (FF) .

e.

Use the wire housing screw (EE) to screw the

wire housing cover (B).

Note: For single wall switch applications, remove

and cut the clear 2 port connectors from

the 2 black wires coming from the bath

fan chassis. Strip 1/2

in.

of

insulation

from the wire ends and connect both

black wires

to

the single black wire

coming from the ceiling/switch.

Hardware Used

e Wire Housing Screw X 1

4. Strip 1/2

in.

of

insulation from wire ends. Grip the wire

firmly and push the stripped end

of

the wire into the

open port

of

two-port quick connect (FF) or three-port

quick connect (GG).

Use

only one stripped end

of

the

wire per port. Verify the stripped end

of

the wire is

fully inserted to the back

of

two-port quick connect (FF)

or three-port quick connect (GG).

Hardware Used

• Two-port Quick connect B

~

Three-port Quick connect B

X 3

X 1

14

Light

Switch

Fan

Switch

BLK

Line

WHT

in

GRD

-Black

Swnch

Box

-White

= Greenl(bare)

Fan

house

house wires

~

L

owes

.

co

m

~

-·

-:

~

UTIL

IT

ECH"

]