Manualshelf

Installation Guide

ManualsBrandsUtilitech ManualsBath2-Sone 70-CFM Light Oil-Rubbed Bronze Bathroom Fan Room with Light
11121314151617181920
CARE AND MAINTENANCE
Cleaning the Fan Assembly
1.
Switch the power
off
at the service panel and lock the service disconnecting means
to
prevent
power from being switched on accidently.
2.
Remove the light kit pan and unplug the fan assembly.
3.
Gently vacuum the fan, motor and interior
of
the housing.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
The fan does not 1. The fuse has blown or the breaker 1 . Replace the fuse or reset the
turn on. needs
to
be
reset. breaker.
2. There is a loose connection
in
one 2. Ensure all
of
the connections are
or more
of
the wires. secure.
3. The wires are not connected 3. Ensure the wiring matches the
correctly. diagram.
The light does not 1 . The light bulb needs to be 1. Replace the light bulb with a new
turn on. replaced. bulb.
2. There is a loose connection
in
one 2. Ensure all
of
the connections are
or more
of
the wires. secure.
3. The wires are not connected 3. Ensure the wiring matches the
correctly. diagram.
The fan is noisy. 1 . One or more
of
the screws in the 1. Check and tighten all screws.
fan is loose. 2. Ensure the glass is secure.
2. The glass is not tightened securely
on the fan.
L
owes
.
co
m
~
-ยท
-:
~
UTIL
IT
ECH"
]
18