Installation Guide

INITIAL INSTALLATION INSTRUCTIONS
3. Remove the wire housing screw (EE) from the
wire housing cover (B).
Hardware Used
• Wire Housing Screw @)miD x 1
For installing the fan in a new construction application
where drywall
or ceiling material is not previously
installed (exposed joists are visible), proceed to
NEW
CONSTRUCTION INSTALLATION INSTRUCTIONS on
page
7.
For installing the fan to a joist in an existing
construction application (you already have a
ceiling installed and have proper installation
access from above the ceiling), proceed
to
EXISTING CONSTRUCTION (JOIST I
ABOVE CEILING ACCESS APPLICATION)
INSTALLATION INSTRUCTIONS
on page 10.
For installing the fan to a joist
in an existing construction
application (you already have a ceiling installed and
do
not have proper installation access from above
the ceiling), proceed to
EXISTING CONSTRUCTION
(BELOW CEILING APPLICATION) INSTALLATION
INSTRUCTIONS
on page 13.
NEW CONSTRUCTION INSTALLATION INSTRUCTIONS
1. Use long screws (AA) to screw the housing (A)
directly to the joist using the keyhole mounting
tab holes. Alternatively, one side of the housing
has four holes and the other side has two holes.
Choose the side
that works best for the
installation area.
Hardware Used
Long Screw OllllJlllJ)J))ll))))l)))))llJ>
x 2 or 4
7
keyhole
mounting
tab holes
[m uTILI TECH. )
Lowes.com i:JJ -·-