Installation Guide
EXISTING CONSTRUCTION (BELOW CEILING APPLICATION) INSTALLATION INSTRUCTIONS
8. Strip
1/2
in.
of
insulation from wire ends. Grip the wire
firmly and push the stripped end
of
the wire into the open
port
of
two-port
quick
connect (GG)
or
three-port quick
connect
(HH). Use only one stripped end
of
the wire
per
port. Verify the stripped end
of
the wire is fully inserted to
the back
of
two-port
quick
connect (GG) or three-port
quick
connect (HH).
Hardware Used
G Two-port Quick Connect
~
x3
~
Three-port Quick
Connect~
X 1
9. Install the previously removed wire housing cover (J)
into the housing (A) and secure using the wire housing
screw
(FF). Ensure all
of
the wiring connections are
inside
of
the housing (A)
or
under
the wire housing
cover
(J).
Hardware Used
• Wire Housing
Screw
~
Proceed
to
FINAL INSTALLATION INSTRUCTIONS
below.
FINAL INSTALLATION INSTRUCTIONS
1. Insert the slot on the
motor
assembly (B) into the
X
1
hook
of
the housing (A),
then
install the
motor
assembly
(B) into the housing (A). Rotate the housing lock (I)
counterclockwise to lock the
motor
assembly (B) in place.
18
house
wires
•
~
UTILI
TECH'
J
Lowes .com
\:1
-·-