Installation Guide

FINAL INSTALLATION INSTRUCTIONS
2. Install previously three removed motor screws (CC) and
tighten securely.
Hardware Used
0 Motor Screw {)ml
x3
3. Reconnect the motor power connector (H) from the
motor assembly (B) to the receptacle in the housing (A).
4. Remove the preassembled hex nut (DD) and
washer
(EE) from the motor assembly (B).
Hardware Used
G Hex Nut
G) Washer
19
X 1
X 1
I
I
-
••
0
•
IP
a
Q
I
I
I
!
~ UTILI TECH' ]
Low es . com ~ -·-: