Installation Guide
FINAL INSTALLATION INSTRUCTIONS
8. Install one nightlight (L) and two bulbs (M) into the
socket on the light kit pan (F).
9. Install the light kit (G) into the light kit pan (F) by putting
the preassembled flange
on
the light kit (G) into the
slide guide
on
the light kit pan (F).
0
•
0
Important: Hold the light kit
in
place to prevent it from
falling out.
t
~-----~.-~~
/ _
1
c ____ O c
CARE AND MAINTENANCE
A WARNING: Never immerse metal or electrical parts
in
water.
Bulb Replacement: Use two 60-watt max. type-A15 medium-base bulbs
or
13-watt max. medium-
base CFL bulbs for light. Use 7-watt max. type-C7 candelabra-base bulbs for
nightlight.
Cleaning the Glass Shade and Light Kit Pan
Never use abrasive cloth, steel, wool pads
or
scouring powders on the glass shade or light kit pan.
1.
Switch power
off
at the service panel and lock the service disconnecting means to prevent the
power from being switched
on
accidentally.
2.
Remove the glass shade.
3.
Clean the shade with a soft cloth and a mild detergent solution or glass cleaner.
4.
Remove the bulbs from the light kit pan.
5.
Gently vacuum the light kit pan and wipe clean with a soft cloth.
~
UTILI
TECH'
]
Low
es.com
l!l)
-·-:
19