Installation Guide

NEW CONSTRUCTION INSTALLATION INSTRUCTIONS
7. Install the previously removed wire housing cover (K)
into the housing (A) and secure using the wire housing
screw (II). Ensure all
of the wiring connections are inside
of the housing (A) or under the wire housing cover (K).
Hardware Used
0 Wire Housing Screw ~
X 1
8. Connect the round ductwork (not included) to the duct
adaptor (E) and secure with duct tape (not included) or
clamps (not included).
9. Attach the duct adaptor (E) to the housing (A) using the
duct adaptor screws (DD).
Hardware Used
~ Duct Adaptor Screw x2
Proceed to FINAL INSTALLATION INSTRUCTIONS on
page 16.
9
~ UTILI TECH' ]
Low es.com l!l) -·-: