Installation Guide

6
Lowes.com
INSTALLATION INSTRUCTIONS
2. Place pump on a hard surface inside sump
basin. Make sure surface is clear of debris.
NOTE: Never place the pump on clay, earth
or gravel surfaces. It is recommended that the
pump be placed on two bricks (not included)
approximately 2 in. apart.
1.
2
A
2 in.
1
Inlet
pipe
Sump
basin
24 in.
M ax.
11 in. W
3. Connect the discharge pipe, ttings, and
check valve (not included) to the discharge
port of the pump.
NOTE: It is recommended that the
discharge pipe diameter be equal to or
larger than the discharge size of the pump.
NOTE: Pump has a built in weep hole to
prevent air lock. No need to drill another
pipe.
3
A
Discharge
pipe
Discharge
port
Pump must be installed in a suitable basin
(not included), which must be at least 11 in. wide
and no more than 24 in. deep for pump fitted
with vertical on/off switches.
Depth
one in PVC discharge