Operating Guide

5
4. Place pump (A) in an upright position on the
pool cover where water will collect. Do not
suspend pump (A) by the discharge hose or
power cord.
Be sure pump (A) is not sitting in mud, sand, or
debris.
4
5. Plug the pump into a properly grounded, ground
fault circuit interruptor (GFCI) 115 V outlet. For
safety, the pump should always be electrically
grounded to a suitable electrical ground, such
as a grounded water pipe, properly grounded
metallic raceway, or ground wire system.
5
A
3. If using garden hose (not included), thread the
female end of the garden hose into the male
end of the garden hose adapter (B).
For best performance, unwind the hose before
starting the pump.
3
B