How to Guide

18 in.

12 in.

1-1/4-in

discharge

pipe

Check

valve

GFCI outlet

Fill with

water

1. Place pump (A) in a sump basin that is at

least 12 in. wide and 18 in. deep.

2. Install rigid 1-1/4 in. discharge pipe, union,

check valve according to code.

4. Test the operation of pump (A) by pouring

water into the sump basin.

SW1123 C

QUICK REFERENCE

GUIDE.

SEE INSTRUCTION

MANUAL FOR

COMPLETE DETAILS.

WARNING:

FOR YOUR PROTECTION, ALWAYS

DISCONNECT PUMP FROM POWER SOURCE

BEFORE HANDLING.

ITEM #1964546

PEDESTAL

SUMP PUMP

MODEL #

148137

3. Connect pump (A) power supply to a

GFCI-protected receptacle.

Printed in China

REVISED 02/11/19 - REPLACES REV A

PAGE 1
ITEM #1964546 PEDESTAL SUMP PUMP MODEL #148137 A 18 in. QUICK REFERENCE GUIDE. SEE INSTRUCTION MANUAL FOR COMPLETE DETAILS. Check valve 1-1/4-in discharge pipe 12 in. 1. P lace pump (A) in a sump basin that is at least 12 in. wide and 18 in. deep. GFCI outlet A 2. Install rigid 1-1/4 in. discharge pipe, union, check valve according to code. 3. C onnect pump (A) power supply to a GFCI-protected receptacle. WARNING: FOR YOUR PROTECTION, ALWAYS DISCONNECT PUMP FROM POWER SOURCE BEFORE HANDLING.
PAGE 2
ARTICULO #1964546 BOMBA DE SUMIDERO DE PEDESTAL MODELO #148137 A GUÍA DE INICIO RÁPIDO CONSULTE LOS DETALLES COMPLETOS EN EL MANUAL DE INSTRUCCIONES 45,72 cm 30,48 cm 1. Coloque la bomba en un recipiente de sumidero que tenga al menos 30,48 cm de ancho y 45,72 cm de profundidad. Valvula de retención Tubo de descarga rígido de 1-1/4 pulg. Tomacorriente de GFCI A 2. I nstale el tubo de descarga rígido de 1-1/4 pulg., la unión y la válvula de control de acuerdo con la norma. 3.