Installation Guide

Possible Cause Corrective Action
1. Fixture wiring problem. 1. Check wiring for loose connections.
2. No power or failed switch. 2. Check power and switch.
3. Worn-out lamp(s). 3. Replace lamp(s) as needed.
4. Failed ballast. 4. Replace ballast as needed.
1. Fixture not properly grounded. 1. Check grounding system.
2. Wrong lamp(s). 2. Verify lamp is listed on ballast.
3. One or more failing lamps. 3. Replace lamps as needed.
4. Failing ballast. 4. Replace ballast as needed.
Part Description Part #
A Ballast RP-2003076
B
Diffuser RP-4000963
Distributed by:
2345 N. Ernie Krueger Circle
Waukegan, IL 60087 Printed in U.S.A.
CARE AND MAINTENANCE
REPLACEMENT PARTS LIST
Light fails to illuminate.
No flickering.
Light flickers blinks or lights ends
only.
TROUBLESHOOTING
Periodically, dust the diffuser (inside and out) with a clean, dry cloth. Wipe clean with a slightly damp cloth as needed.
Never use abrasive cleansers.
WARRANTY
Fixture Warranty (limited) Fixtures listed herein are warranted to be free from defective materials and workmanship,
and that under appropriate application, installation and operating conditions and when operated at rated voltage, they
will be free from failure of ballasts, lamp holders, or any component part for a period of two years from date of
purchase. Damage incurred in transit from handling is excluded from the terms of this warranty. This warranty extends
only to replacement or repair of defective fixture or components with no labor allowance unless specifically authorized
in writing from factory. This warranty gives you specific rights and you may have other rights that vary from state to
state.
Problem
3.
B
A
AFX Lighting