Warranty Guide

7
Installation is now complete. Turn on power at circuit breaker and flip wall switch to ON position.
Wall switch must remain in the ON position for the motion detector to work properly.
OPERATING INSTRUCTIONS
SENSOR SETTING
Mode
TIME Setting
Description
TEST
TEST
The sensor will detect movement and the light will activate
regardless of time of day. After movement has stopped or left
the coverage area, the light will remain on for about 5
seconds, then turn off.
SECURITY
(DISTANCE)
1 min.
At dusk, the motion sensor becomes active. Any movement
within the coverage area will cause the light to turn on. After
movement has stopped, the light will remain on for the preset
time limit of 1, 3 or 10 minutes, then turn off. The motion
sensor will remain active throughout the night.
At dawn, the motion sensor will deactivate and remain
deactivated throughout the day. Movement will not cause the
light to turn on.
3 min.
10 min.
CAUTION: To avoid water damage and the risk of electrical shock, the motion
sensor controls must be facing the ground when installation is complete.
CAUTION: Ensure fixture is mounted on wall as indicated by icon in lamp base.
Do not mount UPSIDE DOWN to avoid water damage!