Use and Care Guide

The ballast assembly can be replaced without the cutting of any wires. Use a qualified electrician.
Perform ballast replacement after removing light fixture from the wall.
10
CARE AND MAINTENANCE
Ballast assembly replacment.
Step 1: Remove protective screen (F).
Step 2: Remove bulb (D).
Step 3: Loosen the three lens assembly
screws (GG) and remove lens assembly.
Step 4: Remove the two screws (SD)
and washers (SE) connecting the
ballast (SA) to fixture housing (A) (see
Fig 7).
DANGER: Turn power off at the circuit breaker or fuse box before
starting balast replacement.
DANGER: DO NOT rely on wall switch alone to turn off power.
ON
ON
ON
OFF
ON
ON
ON
ON
OFF
Fig. 7
Lowes.com
SA
SB
SC
SD
SE
SH
SE
SF
SH
SD
SF
SI