Installation Guide

6
NEW CONSTRUCTION ASSEMBLY INSTRUCTIONS
BEFORE INSTALLATION: Turn off power source. Review all
safety precautions.
1
EE
EE
B
1. Place LED panel mounting bar (B) on fan housing (A)
and attach where indicated using long machine screws
(EE).
Hardware Used
EE
Long machine screw
x 4
2. Attach the duct connector (I) to the fan housing (A).
2
A
I
3. Insert suspension bracket I (F) into the bracket cover
on the duct connector side. Then, attach suspension
bracket II (G) and suspension bracket III (H) to the back
of the fan housing (A).
3
F
H
G
A
4. Secure the fan housing (A) to joist with suspension
brackets (F, G, H) using long wood screws (AA).
Note: Bottom of fan housing should be ush with the
bottom of the joist. When mounted correctly, the LED
panel mounting bar (B) will hang below the ceiling board.
4
H
F
G
A
AA
AA
AA
View of fan
housing from
the top
Side view
of fan housing
Ceiling board
B
Hardware Used
AA
Long wood screw
x 6
A