Installation Guide

6
NEW CONSTRUCTION ASSEMBLY INSTRUCTIONS
BEFORE INSTALLATION: Turn off power source. Review all
safety precautions.
1
EE
EE
B
1. Place LED panel mounting bar (B) on fan housing (A)
and attach where indicated using long machine screws
(EE).
Hardware Used
EE
Long machine screw
x 4
2. Attach the duct connector (I) to the fan housing (A).
2
A
I
3. Insert suspension bracket I (F) into the bracket cover
on the duct connector side. Then, attach suspension
bracket II (G) and suspension bracket III (H) to the back
of the fan housing (A).
3
F
H
G
A
4. Secure the fan housing (A) to joist with suspension
brackets (F, G, H) using long wood screws (AA).
Note: Bottom of fan housing should be ush with the
bottom of the joist. When mounted correctly, the LED
panel mounting bar (B) will hang below the ceiling board.
Optimum spacing from the bottom of the ceiling board
to the bottom of the mounting bar is 3/4 in. (4.1).
4
Side view
of fan housing
C
eiling board
B
4.1
3/4 in
.
H
F
A
AA
AA
AA
View of fan
housing from
the top
G
Hardware Used
AA
Long wood screw
x 6
A