Installation Guide
10
EXISTING CONSTRUCTION ASSEMBLY INSTRUCTIONS
6. Install a circular 4 in. duct (6.1) (not included) and
secure it with duct tape or clamps (neither included).
Finish ceiling work. The ceiling hole should be
aligned with the edge of the fan housing (A).
7. Insert the fan housing (A) through the existing hole in
the ceiling. The fan housing (A) should be level and
perpendicular to the joist.
8. Mount the fan housing (A) to the ceiling joist using
wood screws (8.1) (not included) where indicated
by arrows inside the fan housing.
4 in. duct
Ceiling
Duct tape
or clamp
6
7
A
6.1
A
8
Ceiling Joist
A
8.1