Installation Guide

11
EXISTING CONSTRUCTION ASSEMBLY INSTRUCTIONS
HUMIDITY SENSING OPERATION
9. Pinch mounting springs (9.1) on grille (B) and
insert into narrow rectangular slots (9.2) inside
the fan (A). Push grille (B) up toward ceiling.
Turn on electricity at breaker box after nishing
installation.
1. Humidity Sensing Mode:
Flip the wall on/off switch to the “ON” position. The
LED indicator light in the fan is BLUE. The fan will
automatically run when the humidity level in the
room is above 60%. If the humidity level is below
60%, the fan will stop automatically.
Blue
LED
Light
2. Full Speed Mode:
Cycle the wall on/off switch to the “OFF” position, then
back to the “ON” position. The LED indicator light
in the fan is AMBER. The fan will run continuously,
regardless of humidity level.
Amber
LED
Light
1
8.3
A
8.1
8.1
8.2
9
B
9.2
9.1
9.1
2