Installation Guide

Possible Cause Corrective Action
1. Fixture wiring problem. 1. Check wiring for loose connections.
2. No power or failed switch. 2. Check power and switch.
3. Worn-out lamp(s). 3. Replace lamp(s) as needed.
4. Failed ballast. 4. Replace ballast as needed.
1. Fixture not properly grounded. 1. Check grounding system.
2. Wrong lamp(s). 2. Verify lamp is listed on ballast.
3. One or more failing lamps. 3. Replace lamps as needed.
4. Failing ballast. 4. Replace ballast as needed.
Part Description Part #
A Ballast 2004003
B Socket 3000180, 3000181
C Diffuser 4000966
D Oak wood end 7000361
E #8 X 1/2 in. wood screw 9000290
Distributed by:
American Fluorescent
2345 N. Ernie Krueger Circle
Waukegan, IL 60087 Printed in U.S.A.
Periodically, dust the diffuser (inside and out) with a clean, dry cloth. Wipe clean with a slightly damp cloth as needed.
Never use abrasive cleansers.
WARRANTY
Fixture Warranty (limited) Fixtures listed herein are warranted to be free from defective materials and workmanship, and
that under appropriate application, installation and operating conditions and when operated at rated voltage, they will be
free from failure of ballasts, lamp holders, or any component part for a period of two years from date of purchase.
Damage incurred in transit from handling is excluded from the terms of this warranty. This warranty extends only to
replacement or repair of defective fixture or components with no labor allowance unless specifically authorized in writing
from factory. This warranty gives you specific rights and you may have other rights that vary from state to state. For
warranty claims call our customer service department at 1 [phone], 8:00 am - 4:00 pm CST, Monday - Friday.
Problem
To order replacement parts call our customer service department at
1 [phone], 8:00 am - 4:00 pm CST, Monday - Friday.
CARE AND MAINTENANCE
REPLACEMENT PARTS LIST
Light fails to illuminate.
No flickering.
Light flickers blinks or lights ends
only.
TROUBLESHOOTING
3.