Use & Care Guide

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install

the product.

WARNING

• Read all safety precautions and installation instructions carefully before installing or servicing

this fixture. Failure to comply with these instructions could result in potentially fatal electrical

shock and/or property damage.

• It is recommended that a qualified electrician perform all wiring. This fixture must be wired in

accordance with all national and local electrical codes.

• To reduce the risk of electrical shock, and to assure proper operation, this fixture must be

adequately grounded.

CAUTION

• Do not handle any energized fixture or attempt to energize any fixture with wet hands or while

standing on a wet or damp surface or in water.

• Disconnect electrical power before installing or servicing any part of this fixture.

• Do not use with dimmer switch of any kind.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with

package contents list and hardware contents list. If any part is missing or damaged, do not

attempt to assemble, install or operate the product.

Estimated Assembly Time: 45 minutes

Tools required for assembly: Eye protection, screwdriver, ladder

Helpful tools: Wire cutter, pliers, stud finder, wire stripper, drill with 1/4 inch bit

HARDWARE CONTENTS (shown actual size)

Screw

Qty. 4