Operating Guide

center of the base assembly.

Feed the power cord (C) through the

ASSEMBLY INSTRUCTIONS

Before beginning assembly of product, make sure all parts are

present. Compare parts

with package contents list. If any part is

missing or damaged, do not attempt to assemble the

oduct.

No Tools Required for

Assembly.

Estimated Assembly Time: 5-10 minutes

Align　the　two　portions　of　circular　

base　and　insert　the　four　connectors　

of　the　rear　base　B 　into　the　four　　

slots　of　the　front　base　A ．　Please　

ensure　four　buckles　are　connected

closely　and　the　two　parts are tightly

secured．　There　should　be　a　click”

sound　when　the　buckles　are　properly　

connected ．　

( )

“

(Fig. 1)

Buckles

Connectors

PAGE 1
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 5-10 minutes No Tools Required for Assembly. ASSEMBLY INSTRUCTIONS 1.
PAGE 2
3. Align the groove and arrow at the bottom of the fan housing ( D ) to the arrow on the base assembly ( which is near the central hole edge of the base assembly ) (Fig. 3). Push the base assembly into the fan body until a “click” is heard. Please make sure the three buckles at the bottom of the fan body connected closely to the base and all connections between the fan body and the base are tight and secure (Fig. 4). 4.