Manualshelf

Warranty Guide

ManualsBrandsUtilitech ManualsOutdoor Motion Light Sensor AdaptersGYQ27-W
12345678910
2
PACKAGE CONTENTS
PART
DESCRIPTION
QUANTITY
A
Sensor
1
HARDWARE CONTENTS
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
WARNING
● To prevent electric shock, ensure that the power is disconnected before installation.
● Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
● This light control (120V, 60Hz) automatically turns a light on for a set amount of time (1, 3 or 10
minutes) or for 5 seconds in Test Mode. It senses activity at distances up to 70 ft. away.
● Electrical load: up to 4.2 A, 504W maximum tungsten or incandescent, 1.25 A, 150W maximum
dimmable LED or CFL.
● This light control can be used with dimmable LED, dimmable CFL, halogen and incandescent
bulbs.
● To control the floodlight manually, the control must be wired through a switch.
● Keep regular PAR-38 bulbs at least 1 in. (25 mm) from the sensor. Halogen bulbs should be kept
at least 2 in. (51 mm) from the sensor.
● Wait for the fixture to cool before performing maintenance.
AA
A