Installation Guide

4
5 Light Setting Button
ASSEMBLY INSTRUCTIONS
Hardware Used
The 5 light Setting Button (E) is located along the top edge side of
the xture that allows the color temperature of the light to be adjusted
between 5 values: 2700K,3000K, 4000K, 5000K, 6500K.
Press button until desired color temperature is achieved.
NOTE: Default setting is 4000K
Removable button
Optional: To remove the5 light Setting Button (E) from view, pull the
switch out from the slot connected to the xture pan (B). NOTE: Save
and re-install the tab to change color temperature setting if desired.
1. Rotate all locking tabs (A) clockwise to unlock diffuser (D) from
xture pan (B). Remove diffuser (D). DO NOT remove white paper
reector afxed to xture pan.
2. Attach threaded tube (AA) to threaded hole in mounting bracket
(CC). Lock in place using hex nut (BB). Threaded tube should extend
about 1/2 in. below ceiling line. Securely attach the mounting bracket
using the provided box screws (DD).
E
D
A
B
E
B
B
1
2
AA
Threaded Tube Qty. 1
BB
Hex Nut Qty. 1
DD
Box Screw Qty. 2
CC
Mounting Bracket Qty. 1
GND
1/2 in.
1,27 cm
DD
DD
DD
BB
AA
AA