Installation Guide

Turn of the power at fuse or circuit breaker box before installation and maintenance.
NOTE: This fixture should be used on a 120-volt fused circuit (check fixture labeling).
Fixture must be installed according to National Electric Code and local building codes.
If you are unsure about wiring, consult a qualified electrican.
DO NOT USE ON A DIMMING CIRCUIT.
The product shall be mounted directly below a grounding-type ceiling-mounted
receptacle.
Attach the supply cord plug to the receptacle above the fixture, not allowing the cord to
come into contact with the metal chain supports. Use a tie wrap (not included) to loosely
bundle any excess cord.
32
PACKAGE CONTENTS
A
PART DESCRIPTION QUANTITY
A Fixture assembly 1
SAFETY INFORMATION
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or
install the product.
Avoid fire or electric shock.
Follow installation instructions carefully.
If unsure about electrical installation, consult a qualified electrician.
Wear rubber-soled shoes and work on a sturdy wooden ladder.
Ground fixture to avoid potential electric shock.
Handle metal parts carefully to prevent cuts.
To avoid a hazard to children, account for all parts and destroy all packing materials.
This device complies with Part 18 of the FCC Rules.
1.
2.
3.
4.
5.
6.
7.
8.
1.
2.
3.
4.
5.
6.
CAUTION
HARDWARE CONTENTS
AA BB
Chain with S Hook
Qty. 2
J Hook
Qty. 2
WARNING
Lowes.com Lowes.com
PREPARATION
Before beginning installation of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is missing or
damaged, do not attempt to assemble, install or operate the product.
Estimated Assembly Time: 10 minutes
Tools required: Pliers, Phillips Screwdriver, Hammer
ASSEMBLY INSTRUCTIONS
Install the J hooks (BB) into the ceiling exactly 36 in.
apart.
1.
1
BB